
AJ Long Electric · Since 1996
Choose airflow, light and controls for the room you actually use. We review the mounting point and wiring along with the fan, so the installation plan accounts for more than its appearance.
Planning your project in Reston
For a Reston townhouse bedroom, compare blade clearance, bed placement and low-speed sound before selecting a fan. A low-profile fan can suit limited ceiling height, but the mounting box still needs to be suitable for fan support. If the existing wall switch controls a receptacle instead of a ceiling outlet, a new wiring route may be needed.
Send the floor-to-ceiling measurement and a photo of the switch and ceiling outlet. Mention whether there is an attic or another finished room above.
Reston Association publishes exterior design guidance for covenanted property, including cluster and common-area improvements. Confirm whether the property belongs to the association and which cluster standards apply before selecting visible exterior fixtures.
A fan adds air movement; a flush-mount or semi-flush light serves illumination. Room clearance and the way you use the space help determine which is appropriate.
Ceiling slope, structural support and indoor or outdoor exposure determine suitable mounting hardware and equipment. Use the selected manufacturer's installation requirements.
Decide whether light and motor should operate separately and whether you prefer a wall control or remote. Existing dimmers are not interchangeable with fan-speed controls.
Your estimate accounts for the selected equipment, existing wiring, access and any required coordination. We confirm the property jurisdiction and applicable permit or building requirements before defining the work.
Estimates are free. Diagnostic or inspection work, installation, equipment and any finish restoration are identified separately in the agreed scope. We confirm available times after your request.
Explore our ceiling fans servicePossibly. The existing box, support, wiring and room clearances must be checked first. A light's mounting point is not automatically suitable for a fan, and new controls or wiring may be part of the scope.
You can share a candidate model and its installation sheet first. Checking mounting, clearance and exposure requirements before purchase helps avoid choosing equipment that does not fit the location.
Related Services
We also provide expert electrical services in these communities.
Share the property address, the result you want and any equipment you have selected. We will confirm the next step for your home.
Request an Estimate