
Install a compatible panel surge protector, replace an inactive device, or include protection with a panel project. We identify the equipment, connection work and any corrections in a written estimate before installation. Trusted by homeowners throughout Fairfax County since 1996.
Great Falls properties have the longest exposure to weather in this part of Fairfax County. Large lots in Colvin Run, Forestville and Riverbend often have long overhead or buried service runs, a well pump, pool equipment and a detached garage or barn, and each one is another path for a surge to enter.
A surge device at the house only protects the house. On a Great Falls estate the loads that fail are often out in the yard. A well pump on its own feeder, pool equipment at a pad, a detached garage on a subpanel and a guest cottage do not live behind the main panel's device. A single protected panel at the main does not automatically cover a subpanel in an outbuilding, so we plan protection at each panel where the manufacturer allows it, and keep the lead lengths short. On a 400 amp service that feeds two panels, each Type 2 device is chosen and listed for the panel it sits on. We also look at the service disconnect, where one Type 1 device may make more sense on a split or paired-panel setup if its listing allows, and we verify grounding and bonding under NEC 250 at each building. Long runs add voltage drop and ground-path questions that are best settled with measurements. Dominion Energy owns the line up to the meter, and Fairfax County Land Development Services handles permits.

Our licensed electricians serving Fairfax County
| Typical cost in Great Falls | Quoted by device, panel connection and installation scope.The written estimate follows the defined equipment, access, routing, and coordination scope. |
|---|---|
| Typical timeline | Confirmed after the scope and coordination path are defined |
| Permit authority | Fairfax County Land Development ServicesAJ Long Electric confirms the permit and inspection path for the address and states the included coordination in the written proposal. |
| Applicable code standard | NEC Article 242 & 250surge-protective devices and grounding (National Electrical Code, NFPA 70). |
| Most common local condition | Property-specific equipment, access, and electrical conditions are confirmed during the assessment. |
Permit fees, scope, and existing-condition surprises affect final pricing. Verify current requirements with the Fairfax County Land Development Services and review the NFPA 70 (National Electrical Code).
Service-wide details are on our surge protection page:
Not reliably. Protection at the main reduces risk for loads on that panel, but a detached building fed by a long feeder has its own exposure and its own panel. We usually add a listed device at the outbuilding subpanel and check grounding there under NEC 250. Where the building has a separate service, it gets its own plan.
A device at the pump's panel or the pressure-tank control point can lower the exposure, and it is worth doing on a pump that has already failed once. It cannot stop every event, and a direct or very close lightning strike can damage almost anything. We look at the pump circuit, the grounding and the conductor path, then recommend a scope.
It depends on how the service is arranged. If both panels are fed from a single meter-main and a disconnect, one Type 1 device at the service disconnect may be simpler than two panel devices, where its listing allows. If they are separate, each panel may need its own. We read the labels, check the ratings and fault current, and put the plan in writing.
Pool pumps, heaters and control boards are common casualties because they sit outside and share bonding with the pool. A device on the pool subpanel and a bonding check help, but the pool's bonding grid is its own subject and has to be correct first. We look at both and tell you what we see.
Discuss surge protection for your Great Falls property with AJ Long Electric. Call (571) 444-6886 or request an appointment online so we can confirm the project details and current scheduling availability.
Our licensed electricians are ready to assist you in Great Falls.
Request QuoteGuides
Expert electrical guides to help you make informed decisions.
Understand what an installed surge-protection quote includes, why panel fit and connection work change the price, and how to compare a device price with a complete project.
Understand the price difference between a confirmed breaker replacement, unexplained tripping and a larger panel repair. Compare compatible parts, labor and visit terms.
A comprehensive guide to electrical panel upgrades covering signs you need an upgrade, the process, costs, and what to expect.
Related Services
Explore our other professional electrical services.
Property-specific electrical panel replacement and service-capacity planning, with load calculations, utility coordination, labeling, and permit-path confirmation.
Learn MoreFind out whether a repeated trip comes from the circuit, connected equipment or the breaker itself. We replace a confirmed defective breaker with an exact compatible device and quote broader panel or wiring repairs separately.
Learn MoreAccessible residential electrical-system review with a written, photo-supported record of observed conditions and clearly stated inspection limits.
Learn MoreDiagnostic service for power loss, flickering, dead outlets, repeated tripping, heat, noise, and other residential electrical symptoms.
Learn MoreRequest a property-specific review for surge protection in Great Falls. AJ Long Electric will confirm the relevant conditions, define the proposed electrical scope, and then confirm current scheduling availability.