
Find out whether a repeated trip comes from the circuit, connected equipment or the breaker itself. We replace a confirmed defective breaker with an exact compatible device and quote broader panel or wiring repairs separately. Trusted by homeowners throughout Fairfax County since 1996.
2724 Dorr Ave, Suite 102, Fairfax, VA 22031Our Fairfax headquarters — where mail, dispatch, and our licensed electrical team have been based since 1996.
In Fairfax, a breaker that runs warm or trips without a clear cause needs a look at the wire behind it as well as the breaker. AJ Long Electric checks breakers, conductors and bus connections in Mantua, Mosby Woods, Kings Park and Fair Oaks homes before replacing any part.
Many Mantua and Mosby Woods houses date from the mid-1960s, and some homes built from about 1965 to 1973 have aluminum branch wiring. Aluminum changes the breaker job. The breaker terminal must be marked for aluminum, usually AL/CU, and the connection needs the torque the label gives. A loose aluminum connection at a breaker can heat up, discolor the insulation and make the breaker trip or run warm. Kings Park homes from the early 1970s and Fair Oaks homes from the 1980s are newer, but their panels are now forty to fifty years old. Age alone does not mean a breaker has failed. We look at the conductor end, the breaker terminal and the bus connection, and we compare the breaker size to the wire. A replacement must be listed for that panel or classified for use in it. A Fairfax mailing address can be inside the City of Fairfax or in Fairfax County, so we confirm which one covers the property before any permitted work.

Our licensed electricians serving Fairfax County
| Typical cost in Fairfax | $150-$350 per breakerThe written estimate follows the defined equipment, access, routing, and coordination scope. |
|---|---|
| Typical timeline | Confirmed after the scope and coordination path are defined |
| Permit authority | Fairfax County Land Development ServicesAJ Long Electric confirms the permit and inspection path for the address and states the included coordination in the written proposal. |
| Applicable code standard | National Electrical Code (NFPA 70), as adopted in VA |
| Most common local condition | Property-specific equipment, access, and electrical conditions are confirmed during the assessment. |
Permit fees, scope, and existing-condition surprises affect final pricing. Verify current requirements with the Fairfax County Land Development Services and review the NFPA 70 (National Electrical Code).
Service-wide details are on our circuit breaker page:
It can. The new breaker's terminal must be marked for aluminum conductors, and the connection is tightened to the value on the label. We check the conductor end for nicks, heat damage or corrosion before connecting it. Replacing a breaker does not address aluminum connections at outlets, switches and splices. Those are separate work, and we tell you if we see signs of trouble there.
Addresses inside the independent City of Fairfax go to the City. Addresses outside the City limits go to Fairfax County Land Development Services. A Fairfax mailing address does not tell you which one applies. We confirm the property location and the scope of work, then tell you whether a permit is needed and which office issues it.
Not on age alone. Breakers wear with heat, load and use, and some last much longer than others. We replace a breaker that shows damage or overheating, fits loosely on the bus, or will not reset or hold. A breaker that works and looks sound can stay. If you are planning a new load, such as an EV charger, panel capacity is a separate question.
Discuss circuit breaker replacement for your Fairfax property with AJ Long Electric. Call (571) 444-6886 or request an appointment online so we can confirm the project details and current scheduling availability.
Our licensed electricians are ready to assist you in Fairfax.
Request QuoteWe also provide circuit breaker services in these nearby communities.
Guides
Expert electrical guides to help you make informed decisions.
Understand the price difference between a confirmed breaker replacement, unexplained tripping and a larger panel repair. Compare compatible parts, labor and visit terms.
Essential tips for maintaining your electrical panel, including what homeowners can safely inspect and when professional service is needed.
Understand what an installed surge-protection quote includes, why panel fit and connection work change the price, and how to compare a device price with a complete project.
Related Services
Explore our other professional electrical services.
Diagnostic service for power loss, flickering, dead outlets, repeated tripping, heat, noise, and other residential electrical symptoms.
Learn MoreProperty-specific electrical panel replacement and service-capacity planning, with load calculations, utility coordination, labeling, and permit-path confirmation.
Learn MoreInstall a compatible panel surge protector, replace an inactive device, or include protection with a panel project. We identify the equipment, connection work and any corrections in a written estimate before installation.
Learn MoreProperty-specific branch-circuit installation for appliances, workshops, offices, and specialty equipment, sized to the connected load and existing panel.
Learn MoreRequest a property-specific review for circuit breaker replacement in Fairfax. AJ Long Electric will confirm the relevant conditions, define the proposed electrical scope, and then confirm current scheduling availability.