
Find out whether a repeated trip comes from the circuit, connected equipment or the breaker itself. We replace a confirmed defective breaker with an exact compatible device and quote broader panel or wiring repairs separately. Trusted by homeowners throughout Falls Church City / Fairfax County since 1996.
Older Falls Church ramblers and apartments often have breakers carrying more than they should, sometimes with two wires under one screw. AJ Long Electric finds double-tapped and overloaded breakers in Falls Church City, Pimmit Hills and Seven Corners homes and corrects them with the right size and number of breakers.
Pimmit Hills ramblers date from the early 1950s, and some started with small 60-amp panels. Additions, basement rooms and window air conditioners have stretched them. Past owners and handymen solved a lack of spaces by putting two wires under one breaker terminal, which is a double tap, or by using tandem breakers in positions the panel label does not allow. Seven Corners garden apartments and condos add building rules and older panels in small closets. When a breaker trips or runs hot, we count conductors on every terminal, check each tandem against the panel label, look at the bus connection, and size each breaker to its wire. Where the panel has no room left, we say so. That finding often leads to a subpanel or panel discussion, which is separate work. The City of Falls Church and Fairfax County use different permit offices, and a Falls Church mailing address does not tell you which applies.

Our licensed electricians serving Falls Church City / Fairfax County
| Typical cost in Falls Church | $150-$350 per breakerThe written estimate follows the defined equipment, access, routing, and coordination scope. |
|---|---|
| Typical timeline | Confirmed after the scope and coordination path are defined |
| Permit authority | Fairfax County Land Development ServicesAJ Long Electric confirms the permit and inspection path for the address and states the included coordination in the written proposal. |
| Applicable code standard | National Electrical Code (NFPA 70), as adopted in VA |
| Most common local condition | Property-specific equipment, access, and electrical conditions are confirmed during the assessment. |
Permit fees, scope, and existing-condition surprises affect final pricing. Verify current requirements with the Fairfax County Land Development Services and review the NFPA 70 (National Electrical Code).
Service-wide details are on our circuit breaker page:
Usually. Most breaker terminals are listed for one conductor, and two wires under one screw can loosen and overheat. The fix is to give each wire its own breaker, use a breaker marked for two conductors, or join wires from the same circuit with a pigtail. We check the breaker marking and the panel before choosing.
The panel label shows which positions can take tandem breakers, and the breaker itself must be listed for that panel. A tandem in a position the label does not allow is a problem even if it fits. We compare what is installed with the panel marking and replace what does not comply.
It depends on the exact address. Properties inside the City of Falls Church use the City's permit office. Many Falls Church mailing addresses, including Pimmit Hills and much of Seven Corners, are in Fairfax County and use Fairfax County Land Development Services. We confirm the location before scheduling, and whether a permit applies depends on the scope.
Discuss circuit breaker replacement for your Falls Church property with AJ Long Electric. Call (571) 444-6886 or request an appointment online so we can confirm the project details and current scheduling availability.
Our licensed electricians are ready to assist you in Falls Church.
Request QuoteWe also provide circuit breaker services in these nearby communities.
Guides
Expert electrical guides to help you make informed decisions.
Understand the price difference between a confirmed breaker replacement, unexplained tripping and a larger panel repair. Compare compatible parts, labor and visit terms.
Essential tips for maintaining your electrical panel, including what homeowners can safely inspect and when professional service is needed.
Understand what an installed surge-protection quote includes, why panel fit and connection work change the price, and how to compare a device price with a complete project.
Related Services
Explore our other professional electrical services.
Diagnostic service for power loss, flickering, dead outlets, repeated tripping, heat, noise, and other residential electrical symptoms.
Learn MoreProperty-specific electrical panel replacement and service-capacity planning, with load calculations, utility coordination, labeling, and permit-path confirmation.
Learn MoreInstall a compatible panel surge protector, replace an inactive device, or include protection with a panel project. We identify the equipment, connection work and any corrections in a written estimate before installation.
Learn MoreProperty-specific branch-circuit installation for appliances, workshops, offices, and specialty equipment, sized to the connected load and existing panel.
Learn MoreRequest a property-specific review for circuit breaker replacement in Falls Church. AJ Long Electric will confirm the relevant conditions, define the proposed electrical scope, and then confirm current scheduling availability.