
Find out whether a repeated trip comes from the circuit, connected equipment or the breaker itself. We replace a confirmed defective breaker with an exact compatible device and quote broader panel or wiring repairs separately. Trusted by homeowners throughout Arlington County since 1996.
Arlington bungalows and colonials from the 1920s to the 1940s often have two-wire circuits that were moved from fuses to breakers years ago. AJ Long Electric replaces worn or tripping breakers in Cherrydale, Lyon Village and Ashton Heights homes and can add ground-fault protection at the panel where wall devices are hard to change.
Houses in Cherrydale, Lyon Village and Ashton Heights were wired before equipment grounding conductors were standard. Most have since been converted from fuses to breakers, and the conversion did not always match each breaker to the wire it protects. We check the conductor size against every breaker we touch. Window air conditioners are a common load here, and several rooms may share one circuit, so a trip may be an overload rather than a bad breaker. Plaster walls make replacing many outlets slow work. A ground-fault breaker at the panel protects the whole circuit, including outlets on two-wire wiring. When an ungrounded outlet is replaced with a three-slot type on a GFCI-protected circuit, the code calls for it to be marked No Equipment Ground and GFCI Protected. Condo units in Clarendon and Ballston have small unit panels, and building management usually sets access. Arlington County Inspection Services Division handles permits when the work needs one.

Our licensed electricians serving Arlington County
| Typical cost in Arlington | $150-$350 per breakerThe written estimate follows the defined equipment, access, routing, and coordination scope. |
|---|---|
| Typical timeline | Confirmed after the scope and coordination path are defined |
| Permit authority | Arlington County Inspection Services DivisionAJ Long Electric confirms the permit and inspection path for the address and states the included coordination in the written proposal. |
| Applicable code standard | National Electrical Code (NFPA 70), as adopted in VA |
| Most common local condition | Property-specific equipment, access, and electrical conditions are confirmed during the assessment. |
Permit fees, scope, and existing-condition surprises affect final pricing. Verify current requirements with the Arlington County Inspection Services Division and review the NFPA 70 (National Electrical Code).
Service-wide details are on our circuit breaker page:
Yes, in a specific way. A ground-fault breaker trips when current leaks to ground, and it works on a two-wire circuit. It does not create an equipment ground. Outlets on that circuit can be three-slot types only if they are marked as having no equipment ground. Equipment that needs a true ground, such as some surge protectors, still needs a grounded circuit.
Older houses often put several rooms on one circuit, so two units plus other loads can pass the breaker's rating. A larger breaker is not a safe fix, because the wire behind it sets the limit. The fix is to trace the circuit, move a load to another circuit, or add a new circuit for the air conditioners.
Usually, once building management approves access and work hours. The replacement must be listed for that panel or classified for use in it. We confirm the panel make before the visit, check the bus connection and torque, and keep the work inside your unit. Equipment that serves the whole building is normally the association's responsibility.
Discuss circuit breaker replacement for your Arlington property with AJ Long Electric. Call (571) 444-6886 or request an appointment online so we can confirm the project details and current scheduling availability.
Our licensed electricians are ready to assist you in Arlington.
Request QuoteWe also provide circuit breaker services in these nearby communities.
Guides
Expert electrical guides to help you make informed decisions.
Understand the price difference between a confirmed breaker replacement, unexplained tripping and a larger panel repair. Compare compatible parts, labor and visit terms.
Essential tips for maintaining your electrical panel, including what homeowners can safely inspect and when professional service is needed.
Understand what an installed surge-protection quote includes, why panel fit and connection work change the price, and how to compare a device price with a complete project.
Related Services
Explore our other professional electrical services.
Diagnostic service for power loss, flickering, dead outlets, repeated tripping, heat, noise, and other residential electrical symptoms.
Learn MoreProperty-specific electrical panel replacement and service-capacity planning, with load calculations, utility coordination, labeling, and permit-path confirmation.
Learn MoreInstall a compatible panel surge protector, replace an inactive device, or include protection with a panel project. We identify the equipment, connection work and any corrections in a written estimate before installation.
Learn MoreProperty-specific branch-circuit installation for appliances, workshops, offices, and specialty equipment, sized to the connected load and existing panel.
Learn MoreRequest a property-specific review for circuit breaker replacement in Arlington. AJ Long Electric will confirm the relevant conditions, define the proposed electrical scope, and then confirm current scheduling availability.